Select the type of input (step, ramp or sinusoidal) with the "choose input" buttons, and use the sliders to change the time constant \(\tau\) and the input magnitude \(a\). For a sinusoidal input, the angular frequency \(\omega\) can also be varied.
A transfer function is the ratio of the output to the input of a system. The system response is determined from the transfer function and the system input. A Laplace transform converts the input from the time domain to the spatial domain by using Laplace transform relations. The transformed spatial input is multiplied by the transfer function to get the output in the spatial domain. It is then converted back to the time domain using an inverse Laplace transform.
This Demonstration shows the responses to a first-order transfer function. You can vary the magnitude of the input and the time constant \(\tau\). The time constant is related to how long a system takes to reach the new steady state. The input can be a step function, a ramp, or a sinusoidal input.
Step Input and Response
For a step input of magnitude \(a\),
Ramp Input and Response
For a ramp input of magnitude \(a\),
Sinusoidal Input and Response
Symbols
This simulation was created in the Department of Chemical and Biological Engineering at University of Colorado Boulder for LearnChemE.com by John L. Falconer using Claude AI. It is a JavaScript/HTML5 implementation of a Mathematica simulation by Simon M. Lane. It was prepared with financial support from the National Science Foundation (DUE 2336987 and 2336988). Address any questions or comments to LearnChemE@gmail.com.