A reversible reaction, A ⇌ B, takes place in an adiabatic plug-flow reactor (PFR). Construct a conversion-versus-temperature diagram by plotting the energy balance and equilibrium lines. The energy balance line is plotted first for a feed that contains only reactant A, and then it is plotted for a feed that also contains an inert component. Click the "new problem" button for a new set of conditions. Before moving on to the next step, check "solution" to see the answer. Once you check "solution", you cannot change your answer.
For the reversible reaction \(\mathrm{A} \rightleftharpoons \mathrm{B}\) with both reactant \(\mathrm{A}\) and inert component \(\mathrm{I}\) in the adiabatic PFR feed, the equilibrium constant is:
where \(K_m\) is the equilibrium constant at temperature \(T_m\) (K), \(\Delta H\) is the heat of reaction (J/mol), \(R\) is the ideal gas constant (J/mol K) and \(T\) is the temperature of the reaction (K).
The equilibrium conversion is obtained from the equilibrium constant, assuming ideal gases:
where \(X_e\) is the equilibrium conversion, \(X_{EB}\) is the conversion calculated from the energy balance, \(\alpha\) is the ratio in the molar flow rate of inert to reactant, \(C_p\) is the heat capacity (J/mol K) and \(T_f\) is the feed temperature (K).
This simulation was created in the Department of Chemical and Biological Engineering at University of Colorado Boulder for LearnChemE.com by John L. Falconer using Claude AI. It is a JavaScript/HTML5 implementation of a Mathematica simulation by Rachael L. Baumann. It was prepared with financial support from the National Science Foundation (DUE 2336987 and 2336988). Address any questions or comments to LearnChemE@gmail.com.