A cylinder with diameter 2 m, length 10/π m (≈ 3.18 m), and volume 10 m³ is placed in a tub of liquid. Depending on the specific gravities of the cylinder and the liquid, the cylinder either floats or sinks.
Select the material of the cylinder (aspen wood, heavy oak wood, or PVC) or the liquid (gasoline, water, or seawater) with the buttons, or set a custom specific gravity for either one with the sliders. The displaced liquid volume, the cylinder weight, and the buoyant force are shown above the cylinder. If the cylinder floats, the distance from the top of the cylinder to the liquid surface, h, is also shown.
The buoyant force is equal to the weight of the liquid displaced by an object:
\[ F_B = \rho_L V_L g = \gamma_L V_L = SG_L V_L \gamma_w \qquad (1) \]
where \(F_B\) is the buoyant force, \(\rho_L\) is the density of the liquid, \(g\) is gravitational acceleration, \(\gamma_L\) and \(\gamma_w\) are the specific weights of the liquid and water, respectively, and \(SG_L\) is the specific gravity of the liquid with respect to water.
At equilibrium, an object's buoyant force is equivalent to its weight, or gravitational force \(F_g\):
\[ F_B = F_g = \rho_c V_c g = \gamma_c V_c = SG_c V_c \gamma_w \qquad (2) \]
Here, the subscript \(c\) denotes the properties of the cylinder. If the specific weight of the object is less than the buoyant force acting upon it, it will float. Otherwise, it will sink.
| \(F_B\) | buoyant force (kN) |
| \(F_g\) | gravitational force (weight) of the cylinder (kN) |
| \(g\) | gravitational acceleration (9.81 m/s\(^2\)) |
| \(h\) | distance from the top of the cylinder to the liquid surface (m) |
| \(SG_c\) | specific gravity of the cylinder |
| \(SG_L\) | specific gravity of the liquid |
| \(V_c\) | volume of the cylinder (m\(^3\)) |
| \(V_L\) | volume of liquid displaced (m\(^3\)) |
| \(\gamma_c\) | specific weight of the cylinder (kN/m\(^3\)) |
| \(\gamma_L\) | specific weight of the liquid (kN/m\(^3\)) |
| \(\gamma_w\) | specific weight of water (9.81 kN/m\(^3\)) |
| \(\rho_c\) | density of the cylinder (kg/m\(^3\)) |
| \(\rho_L\) | density of the liquid (kg/m\(^3\)) |
This simulation was created in the Department of Chemical and Biological Engineering at University of Colorado Boulder for LearnChemE.com by John L. Falconer using Claude AI. It is a JavaScript/HTML5 implementation of a Mathematica simulation by Neil Hendren. It was prepared with financial support from the National Science Foundation (DUE 2336987 and 2336988). Address any questions or comments to LearnChemE@gmail.com.